Carbon Fiber Insulation Felt Thermal Conductivity Tester

The DRX-II-SPB Carbon Fiber Insulation Felt Thermal Conductivity Tester mainly tests the thermal conductivity of carbon-containing refractory materials, carbon fiber insulation felts, composite materials, and insulation materials with low thermal conductivity. The instrument is based on the principle of the heat flow meter method, complies with GB/T10295 and other relevant national standards, and has been improved accordingly. Testing is automatically completed by computer with digital display of each state point. Manual testing is also possible, meeting the high-precision testing requirements of material testing and research departments. The instrument references standards GB/T 17911.8-2002 "Refractory Ceramic Fiber Products" and YB/T 4130-2005 "Refractory Materials". Main technical parameters:

1. Operating temperature range: 600℃ to 1600℃.
2. Sample size: φ119×(30-50) mm.
3. Thermal conductivity test range: 0.001 to 5 W/m·K.
4. Accuracy: ≤3%, Repeatability: ≤3%.
5. Fully automatic testing and analysis software.
6. Heating method: 1800-type tungsten molybdenum rod heating (molybdenum rod is a consumable).
7. The test chamber can be filled with gas atmosphere or vacuumed.
8. Cold junction heat flow is measured using imported high-temperature heat flow sensors.
9. Adjustable pressure: 0-0.1 MPa, furnace cooled by circulating water.
10. Can connect to upper computer with fully automatic analysis testing software.
11. Vacuum degree: ≤1000 Pa. Product configuration:
12. DRX-II-SPB thermal conductivity tester main unit - one set.
13. Control cabinet data acquisition device - one set.
14. Cooling constant temperature bath - one set.
15. Testing and analysis software - one set.
16. Imported American heat flow sensor device - one set.
17. Desktop computer - one set. Equipment installation requirements:
18. Power supply: 220V, 50Hz.
19. Laboratory must provide water and electricity systems.
20. Site humidity requirement: less than 80% RH.
21. Occupied area: 2 square meters. Equipment maintenance:
22. All instrument configurations have a one-year warranty (excluding damage caused by human factors or natural disasters).
23. When technicians install, debug, and train on-site, your company should arrange at least two people to learn to ensure normal operation despite personnel changes.
24. Training time is generally 1-2 days, ensuring customers can independently complete testing.
25. The instrument must be kept clean after each test. It is best to use a dedicated computer for the instrument to avoid software damage. After-sales service:
26. All products sold by our factory have a one-year warranty, with free on-site repair during the warranty period (excluding faults or damage caused by human factors or irresistible natural phenomena).
27. Users can consult technical issues via after-sales phone support and receive clear solutions.